NEXPEAK NC202 10A Smart Battery Charger for 12V/24V Cars & More

【LiFePO4 & LEAD-ACID BATTERY CHARGER】12V 10-Amp and 24V 5-Amp 8-stage quick battery charger, charging speed is much faster than 10-Amp or other automotive chargers. Charge or repair all 12-volt and 24volt LiFePO4 or lead-acid automotive, marine and deep-cycle batteries including AGM, GEL, SLA, Flooded in cars, trucks, SUVs, motorcycles, lawnmowers, boat marine, etc. Perfect household tool and present for Xmas or daily use! NOTE: Charging current exceeding 15A could lead to overcharging of the battery and damage to the internal chemicals; choosing the appropriate battery charger is essential!
【UPGRADED 8-STAGE TRICKLE CHARGER】The first battery trickle charger that adopts 8-stage charging process, much safer and more efficient, particularly useful for batteries that sit unused for extended periods, like those in stored vehicles. Automatically enters trickle/float charging mode after fully charged, keep maintaining your batteries during winter and holidays, leave batteries for months and still fully charged when you back.
【BRIGHTER SCREEN VISUALIZED BATTERY CHARGER】 Extra large LCD screen not only clear to see under the sunlight but also displays the charging and battery status; charge voltage and current, inside temperature, charge percentage, summer mode, winter mode, etc. The lengthened 10ft charging cable is more convenient to use. NEW REPLACEMENT AVAILABLE FOR ANY QUALITY ISSUE.
【OVERALL SAFETY CHARGING PROTECTIONS】Smart control, temp compensation in hot climates and under-charging in cold climates, reverse protection, cooling system, overcurrent, fireproof material, overcharge, short circuit. Battery trickle charger with multiple protections ensures the safety charging at anytime anywhere. No worries!
【HIGH-EFFICIENCY PULSE REPAIR EXTEND BATTERY CYCLE LIFE】battery charger automotive detects battery sulfation and acid stratification, takes the newest pulse repair function to restore lost battery performance for stronger engine starts and extended battery cycle time. Try to repair batteries for several hours then fully charge it you will find the difference! NOTE: can not activate or charge totally dead batteries.
NOTE: The no-load output voltage of NC202 battery charger will be 17.0- 17.5V while not connecting to the battery or loads (measured from clamps directly with multimeter), it will turn to normal charging voltage after being connected with the battery. Please remove the power plug from the socket when it’s not in use for charging.