Compact Moon Fire Blowing Stick – Split Type Grill Starter BKMS-43

Product description

Made of duralumin, detachable to 2 parts Fire Blowing Stick # BKMS-43, black color

As it is precisely machined and manufactured, air can be sent in at the desired pinpoint, allowing you to create the desired flame at any time.

Since you can control the amount of air applied for a long time, you can blow smoothly.

Main pipe is carved from a single duralumin pole.

Since it can be disassembled, cleaning and maintenance are easy and can be kept clean.

CNC machined air inlet

You can send the amount of air necessary for every bonfire situation.

The tip comes into contact with the fire source, so it is made of heat-resistant stainless steel.

Convenient to carry in the attached canvas bag

The tip can be removed & stored inside the main pipe.

1 CNC cutting main pipe

2 Blowing air side

3 Tip side

4 Canvas storage bag

How to assembly ( *To store it, follow the steps in reverse.)

The joint parts are screwed. Loosen and remove it.

Remove the stainless steel tip pole inside. It also has a screw on one side.

Screw the joint parts onto the stainless steel tip pole.

Screw the main pipe into the other end.

Check that there is no looseness and you are done. Make sure to keep it close to your mouth to prevent air from escaping.

Items for camping grill

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Customer Reviews

4.8 out of 5 stars 96

3.7 out of 5 stars 11

5.0 out of 5 stars 4

4.5 out of 5 stars 107

4.5 out of 5 stars 218

4.4 out of 5 stars 59

4.6 out of 5 stars 6

Price

EUR 18.76EUR18.76

EUR 17.04EUR17.04

EUR 28.23EUR28.23

EUR 30.08EUR30.08

EUR 30.82EUR30.82

EUR 34.42EUR34.42

—

Model No

# MS-43

# MS-42

# Q28

# MT-17

# MT-18

# MT-19

# T-285A

Dimensions (In use)

L 25.4” / L 64.5cm

L16.3” x W4.5 /L41.5 xW11.5cm

L 11” x W 5.5 / L 28 x W 14cm

L 7” x W 7” x H 11.8”

L 6.5” x W 6.5” x H 11.4”

L 7” x W 7” x H 11.8”

L 14” x W 14” x H 12.2”

Dimensions (Folded)

L 13” / L 33cm

–

–

L 11.8” x W 7”

L 11.8” x W 7”

L 11.8” x W 8”

L 16” x W 13.8”

Storage bag

✔

✘

✘

✔

✔

✔

✘

Material

Duralumin, Stainless steel

Stainless steel, Wood

Cow leather, Polyester

430 Stainless steel

430 Stainless steel

304 Stainless steel

Steel with black plating

Uses

Blow to start fire.

Grab firewood and charcoal.

Protect your hands from heat.

Let charcoal catch fire.

Let charcoal catch fire.

Let charcoal catch fire.

Store firewood & also a table.

Helping you ignite fires more effectively or maintain it.

How to use

-When using a fire blower, it’s easy to blow into it over and over again. Using the fire in this way not only makes it hard to breathe, but it also makes the fire smaller.

-First of all, make sure to place firewood, charcoal, twigs, wood fibers, etc. far enough apart to allow oxygen to circulate. Things burn because flame combines with surrounding oxygen. Even if you want to burn properly, adding too much fuel from the beginning will reduce combustion efficiency.

-When you are ready, light the thin branches or wood fibers and gradually transfer the flame to the thicker wood or charcoal. Once the fire was lit to some extent, a fire blowing stick appeared.

-Use the thick end of the fire blowing stick and hold the thin end closer to the source of the fire. Hold it about 15 to 20 cm away from the fire and blow the air into the area where you want it to burn, along with the surrounding air. Once you stop blowing, you should notice that the fire is getting bigger.

-Fire sticks are also useful when firewood or charcoal is burning but the fire is getting smaller. Blow into the area where you want the fire to grow. You should feel the fuel burn red and the flame growing again.

-If you can effectively start a fire by using a fire blower properly, you will surely be fascinated by the fun of starting a fire.

Precautions

*The tip will become hot during use, so please use leather gloves and be careful not to get burned.

*Do not touch the ground (it may become clogged with soil and become unusable).

*Please be careful not to step on this product or drop it from a high place.

*Please do not hit firewood etc. with the tip.

*Please be careful not to inhale the smoke. All parts are screw type. You can use it for a long time by periodically disassembling, cleaning, and drying it (please wash it with a soft sponge and neutral detergent).

*Do not use tools when assembling or disassembling. Lightly tightening it by hand is sufficient.

*Detailed designs may change slightly depending on the production lot without prior notice. Thank you for your understanding.

A Fire Blowing Stick carved from a duralumin pipe, ensuring a high level of precision. This gear is designed for campers seeking premium camping equipment.
【Blowing Air Side】The opening is adjustable in 0.05mm increments, allowing precise control of the airflow for various bonfire situations.
【Tip Side】The tip, which comes into contact with the fire source, is made of heat-resistant stainless steel.
【Middle Section】The anti-slip design makes it easy to rotate. CNC machining ensures a precision-threaded connection that remains stable and secure.
【Canvas Storage Bag】The tip can be removed and stored inside the main pipe, making it convenient to carry in the included canvas bag.
【Sleek Aesthetic】The black design is stylish and minimalistic, fitting well with various camping setups and other gear.