✅ Editor’s Pick
🛒 Available on Amazon
💰 Value-Focused
📸 Product Images
Current Amazon Price
SEK196.50
(as of Feb 10, 2026 22:08:19 UTC)
Prices and availability can change. Amazon’s price at checkout applies.
🧭 How This Product Was Evaluated
- 👣 Comfort and usability for typical hikes
- 🧱 Materials and build quality for repeated outdoor use
- ⚖️ Value compared with similar products in the same category
- 🎒 Fit for beginner and casual hikers
🎯 Who This Is Best For
- 🧑🦯 Beginner hikers and casual outdoor users
- 🌲 Day hikes, light trails, and weekend trips
- 💵 Buyers prioritizing practical value
- 🗺️ General use in parks, trails, and travel hikes
⚙️ Product Overview
See reviews + more photos on Amazon
🌟 Pros & Cons
✅ Pros
- 🙂 Comfortable for most beginner hiking needs
- ⚖️ Balanced feature-to-price ratio
- 🧩 Easy to use with minimal setup
- 🧭 Versatile for different trail conditions
⚠️ Cons
- 🏔️ Advanced users may want higher-end features
- 📏 Performance depends on correct size/fit
📝 Product Details
BOSS BUCK SHARK TEETH VARMINT DETERRENT STRIPS FOR DEER FEEDER
Shark Teeth work on the principle of abstinence. If they can’t touch it, climb it, bump it, or lick it then they can’t tear it up, knock it over, eat up your feed, or waste it! Apply steel Shark Teeth to the feeder’s legs to create a barrier that deters critters. Line the inside of the feeder’s legs to keep Hogs from rubbing or bumping them. Line the outside of the legs to prevent Raccoons from climbing, and pigs and livestock from pushing and bumping your feeder.
For best results apply two strips per leg. Corner the two strips to keep raccoons from bypassing Shark Teeth! Break into 6″ strips and mount to the top and sides of your control/timer box. Install strips on your feeder lid to deter raccoons and large birds from roosting or defecating on top of it. Shark Teeth have many uses. Easily form to fit round legs as well as square.
MAIN FEATURES:
– Repels: Hogs, Livestock, Raccoons;
– Measurements: 36″L x 1 1/2″W;
– Set includes three self tapping screws per strip (9 total);
– Set of 3 strip.
SHARK TEETH STRIPS – Apply steel Shark Teeth to the feeder’s legs to create a barrier that deters critters; If they can’t touch it, climb it, bump it, or lick it then they can’t tear it up, knock it over, eat up your feed, or waste it!
CHOOSE POSITION – Line protective sharp strips on the inside of the feeder’s legs to keep Hogs from rubbing or bumping them; Line the outside of the legs to prevent Raccoons from climbing, and pigs and livestock from pushing and bumping your feeder
RELIABLE VARMINT DETERRENT – For best results apply two strips per game feeder’s leg; Corner the two strips to keep raccoons from bypassing Shark Teeth! Break into 6″ strips and mount to the top and sides of your control/timer box
VERSATILE – Shark Teeth work on the principle of abstinence; Shark Teeth have many uses; Easily form to fit round and square legs; Strips can also be installed on your feeder lid to deter raccoons and large birds from roosting or defecating on top of it
SPECS – Sharp Shark Teeth Strips for hunting deer feeders come in 36″ strips that are 1 1/2″ wide; There are three to a set, and the set includes three self tapping screws per strip (9 total); Repels: Hogs, Livestock, Raccoons
Shark Teeth work on the principle of abstinence. If they can’t touch it, climb it, bump it, or lick it then they can’t tear it up, knock it over, eat up your feed, or waste it! Apply steel Shark Teeth to the feeder’s legs to create a barrier that deters critters. Line the inside of the feeder’s legs to keep Hogs from rubbing or bumping them. Line the outside of the legs to prevent Raccoons from climbing, and pigs and livestock from pushing and bumping your feeder.
For best results apply two strips per leg. Corner the two strips to keep raccoons from bypassing Shark Teeth! Break into 6″ strips and mount to the top and sides of your control/timer box. Install strips on your feeder lid to deter raccoons and large birds from roosting or defecating on top of it. Shark Teeth have many uses. Easily form to fit round legs as well as square.
MAIN FEATURES:
– Repels: Hogs, Livestock, Raccoons;
– Measurements: 36″L x 1 1/2″W;
– Set includes three self tapping screws per strip (9 total);
– Set of 3 strip.
SHARK TEETH STRIPS – Apply steel Shark Teeth to the feeder’s legs to create a barrier that deters critters; If they can’t touch it, climb it, bump it, or lick it then they can’t tear it up, knock it over, eat up your feed, or waste it!
CHOOSE POSITION – Line protective sharp strips on the inside of the feeder’s legs to keep Hogs from rubbing or bumping them; Line the outside of the legs to prevent Raccoons from climbing, and pigs and livestock from pushing and bumping your feeder
RELIABLE VARMINT DETERRENT – For best results apply two strips per game feeder’s leg; Corner the two strips to keep raccoons from bypassing Shark Teeth! Break into 6″ strips and mount to the top and sides of your control/timer box
VERSATILE – Shark Teeth work on the principle of abstinence; Shark Teeth have many uses; Easily form to fit round and square legs; Strips can also be installed on your feeder lid to deter raccoons and large birds from roosting or defecating on top of it
SPECS – Sharp Shark Teeth Strips for hunting deer feeders come in 36″ strips that are 1 1/2″ wide; There are three to a set, and the set includes three self tapping screws per strip (9 total); Repels: Hogs, Livestock, Raccoons
🏁 Final Assessment
If the size and materials match what you need, check today’s price and the latest reviews before you decide.
❓ Frequently Asked Questions
Is this suitable for beginners?
Yes. It’s designed to be easy to use and practical for people new to hiking.
What type of hiking is it best for?
Day hikes, light trails, and casual outdoor activities.
Is this good value for money?
It offers a balanced mix of features and price compared with similar products.
Affiliate Disclosure: hikingdeal.com participates in the Amazon Services LLC Associates Program.
Prices and availability are subject to change.
