✅ Editor’s Pick
🛒 Available on Amazon
💰 Value-Focused
📸 Product Images
Current Amazon Price
SEK794.96
(as of Jan 30, 2026 00:58:43 UTC)
Prices and availability can change. Amazon’s price at checkout applies.
🧭 How This Product Was Evaluated
- 👣 Comfort and usability for typical hikes
- 🧱 Materials and build quality for repeated outdoor use
- ⚖️ Value compared with similar products in the same category
- 🎒 Fit for beginner and casual hikers
🎯 Who This Is Best For
- 🧑🦯 Beginner hikers and casual outdoor users
- 🌲 Day hikes, light trails, and weekend trips
- 💵 Buyers prioritizing practical value
- 🗺️ General use in parks, trails, and travel hikes
⚙️ Product Overview
See reviews + more photos on Amazon
🌟 Pros & Cons
✅ Pros
- 🙂 Comfortable for most beginner hiking needs
- ⚖️ Balanced feature-to-price ratio
- 🧩 Easy to use with minimal setup
- 🧭 Versatile for different trail conditions
⚠️ Cons
- 🏔️ Advanced users may want higher-end features
- 📏 Performance depends on correct size/fit
📝 Product Details
1, Operating voltage DC 5 to 32V. Total rated current 52 Amps. Paddle switch. Pluggable side wiring terminal block.
2, Input: Rated current 52 Amps. Dual input screw terminal block, the direction of the input terminal wiring can be flexibly selected, and it can also be extended to other modules as its input source. Pitch 10.16mm/0.4″, wire range 20 – 6AWG / 10mm square, strip length 10mm, screw – metric M4.
3, Output: Maximum current 5 Amps for per channel (the factory-installed fuse is 5 amps. If the fuse is replaced, the maximum current can be up to 10 amps). Pluggable terminal block, pitch 5.08mm/0.2″, wire range 28 – 12AWG / 2.5mm square, stripping length 7mm, screw – metric M2.5 slotted.
4, Each output terminal is equipped with an independent switch, which can flexibly control the power supply of each load device.
5, Each output terminal is equipped with an independent fuse, which can protect the power supply of each load device and are not affected by each other. Medium blade ATO fuse. The fuse holder supports fuse replacement, making fuse replacement easy.
6, Each output terminal is equipped with a green LED power indicator. The indicator light comes on when power is on and goes off when the switch is off or the fuse fails.
7, High quality fireproof nylon material DIN rail mount carrier, can support width 35mm, 32mm or 15mm rail. A pair of DIN rail to Wall mounting adapter brackets are also included, which will support wall or wood panel mounting.
8, UL CE CQC certified terminal blocks. UL 94-V0 certified PCB, and UL CE certified DIN rail mount carrier. UL certified fuse holder and fuse. UL CE certified switch.
Operating voltage DC 5 to 32V. Total rated current 52 Amps. Paddle switch. Pluggable side wiring terminal block.
Input: Rated current 52 Amps. Dual input screw terminal block, the direction of the input terminal wiring can be flexibly selected, and it can also be extended to other modules as its input source. Pitch 10.16mm/0.4″, wire range 20 – 6AWG / 10mm square, strip length 10mm, screw – metric M4.
Output: Maximum current 5 Amps for per channel (the factory-installed fuse is 5 amps. If the fuse is replaced, the maximum current can be up to 10 amps). Pluggable terminal block, pitch 5.08mm/0.2″, wire range 28 – 12AWG / 2.5mm square, stripping length 7mm, screw – metric M2.5 slotted.
Each output terminal is equipped with an independent switch, which can flexibly control the power supply of each load device.
Each output terminal is equipped with an independent fuse, which can protect the power supply of each load device and are not affected by each other. Medium blade ATO fuse. The fuse holder supports fuse replacement, making fuse replacement easy.
Each output terminal is equipped with a green LED power indicator. The indicator light comes on when power is on and goes off when the switch is off or the fuse fails.
High quality fireproof nylon material DIN rail mount carrier, can support width 35mm, 32mm or 15mm rail. A pair of DIN rail to Wall mounting adapter brackets are also included, which will support wall or wood panel mounting.
UL CE CQC certified terminal blocks. UL 94-V0 certified PCB, and UL CE certified DIN rail mount carrier. UL certified fuse holder and fuse. UL CE certified switch.
2, Input: Rated current 52 Amps. Dual input screw terminal block, the direction of the input terminal wiring can be flexibly selected, and it can also be extended to other modules as its input source. Pitch 10.16mm/0.4″, wire range 20 – 6AWG / 10mm square, strip length 10mm, screw – metric M4.
3, Output: Maximum current 5 Amps for per channel (the factory-installed fuse is 5 amps. If the fuse is replaced, the maximum current can be up to 10 amps). Pluggable terminal block, pitch 5.08mm/0.2″, wire range 28 – 12AWG / 2.5mm square, stripping length 7mm, screw – metric M2.5 slotted.
4, Each output terminal is equipped with an independent switch, which can flexibly control the power supply of each load device.
5, Each output terminal is equipped with an independent fuse, which can protect the power supply of each load device and are not affected by each other. Medium blade ATO fuse. The fuse holder supports fuse replacement, making fuse replacement easy.
6, Each output terminal is equipped with a green LED power indicator. The indicator light comes on when power is on and goes off when the switch is off or the fuse fails.
7, High quality fireproof nylon material DIN rail mount carrier, can support width 35mm, 32mm or 15mm rail. A pair of DIN rail to Wall mounting adapter brackets are also included, which will support wall or wood panel mounting.
8, UL CE CQC certified terminal blocks. UL 94-V0 certified PCB, and UL CE certified DIN rail mount carrier. UL certified fuse holder and fuse. UL CE certified switch.
Operating voltage DC 5 to 32V. Total rated current 52 Amps. Paddle switch. Pluggable side wiring terminal block.
Input: Rated current 52 Amps. Dual input screw terminal block, the direction of the input terminal wiring can be flexibly selected, and it can also be extended to other modules as its input source. Pitch 10.16mm/0.4″, wire range 20 – 6AWG / 10mm square, strip length 10mm, screw – metric M4.
Output: Maximum current 5 Amps for per channel (the factory-installed fuse is 5 amps. If the fuse is replaced, the maximum current can be up to 10 amps). Pluggable terminal block, pitch 5.08mm/0.2″, wire range 28 – 12AWG / 2.5mm square, stripping length 7mm, screw – metric M2.5 slotted.
Each output terminal is equipped with an independent switch, which can flexibly control the power supply of each load device.
Each output terminal is equipped with an independent fuse, which can protect the power supply of each load device and are not affected by each other. Medium blade ATO fuse. The fuse holder supports fuse replacement, making fuse replacement easy.
Each output terminal is equipped with a green LED power indicator. The indicator light comes on when power is on and goes off when the switch is off or the fuse fails.
High quality fireproof nylon material DIN rail mount carrier, can support width 35mm, 32mm or 15mm rail. A pair of DIN rail to Wall mounting adapter brackets are also included, which will support wall or wood panel mounting.
UL CE CQC certified terminal blocks. UL 94-V0 certified PCB, and UL CE certified DIN rail mount carrier. UL certified fuse holder and fuse. UL CE certified switch.
🏁 Final Assessment
If the size and materials match what you need, check today’s price and the latest reviews before you decide.
❓ Frequently Asked Questions
Is this suitable for beginners?
Yes. It’s designed to be easy to use and practical for people new to hiking.
What type of hiking is it best for?
Day hikes, light trails, and casual outdoor activities.
Is this good value for money?
It offers a balanced mix of features and price compared with similar products.
Affiliate Disclosure: hikingdeal.com participates in the Amazon Services LLC Associates Program.
Prices and availability are subject to change.
